Advanced Search

aldrich Brand

Displaying 30101-30150 of 66743 results.
Sigma Cat.No.Description
GF09493331Vanadium
foil, thickness 0.125 mm, size 35 × 500 mm, purity 99.8%
GF09500778Tungsten
wire reel, 5m, diameter 0.05mm, clean, 99.95%
GF09502770Nickel
foil, 25mm disks, thickness 0.1mm, annealed, 99%
GF09505784Polyphenyleneoxide
(PPO ), (ppo (modified), ppe (modified)), rod, diam. 20 mm, L 1000 mm, pale gray
GF09514830Tungsten
wire reel, 10m, diameter 0.125mm, clean, 99.95%
GF09522053Aluminum
insulated wire, conductor diameter 0.05 mm, length 1 m, insulation thickness 0.008 mm
GF09527766Invar® - controlled expansion alloy
foil, Fe 64%/Ni 36%, thickness 0.25 mm, size 200 × 200 mm, temper annealed
GF09528240Nickel
foil, 4mm disks, thickness 0.25mm, annealed, 99%
GF09528453Platinum-rhodium alloy, Pt87Rh13
0.5m wire, 0.05mm diameter, annealed
GF09529061Polyaramid
(polymetaphenylene isophthalamide), film, thickness 0.13 mm, L 1 m, coil width 33 mm
GF09529768Aluminum
powder, max. particle size 400 micron, weight 500 g, purity 99.5%
GF09534359Indium
foil, 150x150mm, thickness 0.20mm, as rolled, 99.999%
GF09543887Silicon
lump, 5 mm max. lump size, weight 500 g, purity 99.99%
GF09547690Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 10mm disks, 0.025mm thickness, hard
GF09548028Tin
foil, not light tested, 50x50mm, thickness 0.008mm, 99.75%
GF09552708Titanium/Molybdenum
wire, Ti 85%/Mo 15%, 1.0 mm diameter, length 2 m, temper as drawn
GF09558030Molybdenum
wire reel, 5m, diameter 0.5mm, annealed, 99.95%
GF09560561Polyamide - Nylon 6
(PA 6), film, thickness 0.2 mm, L 0.5 m, coil width 190 mm
GF09561898Stainless Steel - 17-7PH alloy, FeCr17Ni7
foil, 300 x 300mm, 0.075mm thickness, annealed - condition a, precipitation hardenable, light tight (lt)
GF09577097Copper
foil, thickness 0.075 mm, length 2 m, purity 99.9%
GF09579998Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 15mm disks, 0.05mm thickness, annealed
GF09581429Indium
rod, 2.0 mm diameter, length 200 mm, high purity 99.999%
GF09582745Silver
foil, 8mm disks, thickness 0.035mm, as rolled, 99.95+%
GF09592757Tungsten-rhenium alloy, W97Re3
0.1m wire, 1.0mm diameter, annealed
GF09598809Platinum
foil, 0.5m coil, thickness 0.025mm, coil width .4mm, as rolled, 99.95%
GF09602412Magnesium
foil, thickness 0.1 mm, 4 mm diameter, purity 99.9%
GF09607181Molybdenum
nut, size m6, length 50 pcs, style hexagonal
GF09623471Molybdenum
foil, 50x50mm, thickness 0.75mm, annealed, 99.9%
GF09629859Germanium
sheet, 10x10mm, thickness 0.5mm, single crystal, -111, 100%
GF09630233Copper
foil, thickness 0.025 mm, size 50 × 50 mm, purity 99.9%
GF09631043Erbium
foil, not light tested, 50x50mm, thickness 0.025mm, as rolled, 99%
GF09632921Silver
insulated wire, 1m, conductor diameter 0.075mm, insulation thickness 0.010mm, PTFE (polytetrafluoroethylene) insulation, 99.99%
GF09638321Nickel
foil, 150x150mm, thickness 0.25mm, as rolled, 99.999%
GF09638411Nickel silver alloy, Cu62Ni18Zn20
200mm tube, 1.0mm outside diameter, 0.1mm wall thickness, 0.8mm inside diameter, as drawn
GF09641820Hafnium
foil, 25x25mm, thickness 0.14mm, annealed, 97%
GF09653801Polyetheretherketone
(PEEK), monofilament, diam. 0.9 mm, L 10 m, condition type a
GF09655263Bismuth
foil, light tested, 50x50mm, thickness 0.01mm, permanent polyester support, 99.97%
GF09657232Titanium-palladium alloy, Ti99.85Pd0.15
foil, 100 x 100mm, 0.45mm thickness
GF09661350Stainless Steel - 17-7PH alloy, FeCr17Ni7
foil, 8mm disks, 0.075mm thickness, annealed - condition a, precipitation hardenable
GF09666861Copper
rod, 100mm, diameter 8.0mm, as drawn, 99.99+%
GF09668537Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 8mm disks, 0.043mm thickness, annealed
GF09680160Silicon carbide
powder, mean particle size 0.1-1 micron, weight 200 g, purity 99%
GF09680306Aluminum
microfoil, disks, 25mm, thinness 0.0075μm, specific density 1.84μg/cm2, permanent mylar 3.5μm support, 99.999%
GF09680542T1 - thermocouple alloy, Ni90Cr10
foil, 2m coil, 100mm coil width, 0.25mm thickness, annealed
GF09686739Platinum-iridium alloy, Pt90Ir10
1m wire, 0.3mm diameter, as drawn
GF09698901Copper
foil, thickness 0.1 mm, length 1 m, coil width 25.4 mm
GF09711840Tin
foil, 4mm disks, thickness 0.05mm, as rolled, 98.8%
GF09713493Niobium
foil, thickness 0.025 mm, size 100 × 100 mm, purity 99.9%
GF09714719Titanium
rod, 100mm, diameter 20mm, as drawn, 99.99+%
GF09716216Tungsten-copper alloy, W60Cu40
foil, 75 x 100mm, 1.0mm thickness

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top