aldrich Brand
Displaying 36451-36500 of 66743 results.
| Sigma Cat.No. | Description |
|---|---|
| GF35175955 | Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8 foil, 10mm disks, 0.5mm thickness, annealed |
| GF35180445 | Palladium-chromium alloy, Pd94Cr6 foil, 25 x 25mm, 0.08mm thickness, as rolled, light tight (lt) |
| GF35181884 | Niobium foil, thickness 0.003 mm, 25 mm diameter, purity 99.9% |
| GF35183471 | Aluminum wire reel, 2m, diameter 0.25mm, as drawn, 99.999% |
| GF35187644 | Aluminum foil, thickness 0.125 mm, length 1.5 m, high purity 99.999% |
| GF35189792 | Lead foil, 6mm disks, thickness 0.5mm, as rolled, 99.99+% |
| GF35195014 | Tungsten-copper alloy, W60Cu40 foil, 25 x 100mm, 0.125mm thickness |
| GF35196330 | Palladium tube, 100mm, outside diameter 2.0mm, inside diameter 1.6mm, wall thickness 0.2mm, as drawn, 99.95% |
| GF35197443 | Silver insulated wire, 50m, conductor diameter 0.125mm, insulation thickness 0.015mm, PTFE (polytetrafluoroethylene) insulation, 99.99% |
| GF35202271 | Polyimide (PI), laminate, thickness 0.4 mm, size 150 × 150 mm, polymer thickness 0.025mm |
| GF35204914 | Stainless Steel - 15-7PH alloy, FeCr15Ni7Mo2.25 foil, 50mm disks, 0.25mm thickness, annealed, precipitation hardenable |
| GF35206747 | Copper-beryllium alloy, Cu98Be2 foil, 0.2m coil, 0.0065mm thickness, as rolled |
| GF35209571 | Stainless steel - AISI 321 foil, Fe/Cr18%/Ni 9%/Ti, thickness 0.25 mm, length 10 m, coil width 150 mm |
| GF35211608 | Silver wire reel, 5m, diameter 0.015mm, annealed, 99.99% |
| GF35211675 | Cellulose (regenerated cellulose), film, thickness 0.021 mm, L 2 m, red |
| GF35221081 | Tungsten wire reel, 5m, diameter 0.75mm, clean, 99.95% |
| GF35224871 | Iron rod, 500mm, diameter 3.2mm, as drawn, 98+% |
| GF35225445 | Molybdenum foil, 10mm disks, thickness 0.008mm, 99.9% |
| GF35225715 | Polyamide - Nylon 6, 6 - 30% Carbon Fiber Reinforced (PA 6, 6 - 30% CFR), granule, 3 mm nominal granule size, weight 200 g, black |
| GF35231778 | Lead foil, 50x50mm, thickness 0.5mm, as rolled, 99.95% |
| GF35241892 | Copper tube, 200mm, outside diameter 0.25mm, inside diameter 0.05mm, wall thickness 0.1mm, as drawn, 99.9% |
| GF35245605 | Tantalum rod, 100mm, diameter 12.7mm, annealed, 99.9% |
| GF35246831 | Bismuth foil, light tested, 25x25mm, thickness 0.02mm, permanent polyester support, 99.97% |
| GF35249654 | Iron foil, 2m coil, thickness 0.125mm, hard, 99.5% |
| GF35250005 | Tungsten foil, not light tested, 50x50mm, thickness 0.004mm, 99.95% |
| GF35250735 | Polymethylpentene TPX®, film, thickness 0.09 mm, diam. 10 mm |
| GF35250803 | Iron foil, 2m coil, thickness 0.05mm, hard, 99.5% |
| GF35253569 | Polyethylene - Low Density (LDPE), rod, diam. 50.8 mm, L 200 mm, natural |
| GF35256225 | Cellulose Acetate (CA), film, thickness 0.025 mm, L 20 m, super-tough |
| GF35256595 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 1m coil, 0.5mm thickness, annealed |
| GF35257271 | Aluminum-magnesium alloy, Al95Mg5 100mm tube, 0.74mm outside diameter, 0.063mm wall thickness, 0.614mm inside diameter, as drawn |
| GF35260747 | Aluminum foil, thickness 0.10 mm, 10 mm diameter, purity 99% |
| GF35267216 | Hastelloy® C276 - heat resisting alloy, Ni57Mo17Cr16FeWMn foil, 100 x 100mm, 0.025mm thickness, as rolled, light tight (lt) |
| GF35282752 | Copper foil, thickness 0.25 mm, length 0.5 m, purity 99.9% |
| GF35283023 | Niobium foil, thickness 0.025 mm, 6 mm diameter, purity 99.9% |
| GF35284271 | Polyamide - Nylon 6, 6 (PA 6,6), rod, diam. 100 mm, L 500 mm |
| GF35285384 | Titanium wire reel, 200m, diameter 0.5mm, as drawn, 99.6+% |
| GF35286295 | Tin-lead-antimony alloy, Sn60Pb39Sb1 foil, 25mm disks, 0.10mm thickness |
| GF35288253 | Tantalum crucible, cylindrical, length 1 pcs, outside diameter 47mm |
| GF35290492 | Superconducting composite wire alloy, NbTi+Cu 5m wire, 0.4mm diameter, copper/ |
| GF35291145 | Gold wire, 0.025 mm diameter, length 1 m, purity 99.99+% |
| GF35291314 | Copper foil, thickness 0.3 mm, 10 mm diameter, purity 99.9% |
| GF35297938 | Iron foil, 2m coil, thickness 0.5mm, hard, 99.5% |
| GF35305860 | Tin foil, not light tested, 50x50mm, thickness 0.006mm, 99.75% |
| GF35314477 | Stainless Steel - AISI 304 alloy, FeCr18Ni10 foil, 150 x 150mm, 0.25mm thickness, hard |
| GF35315412 | Iron rod, 2.0 mm diameter, length 21 mm, purity 99.95% |
| GF35321172 | Iridium rod, 50mm, diameter 3.0mm, as drawn, 99.9% |
| GF35321217 | Zinc foil, 25mm disks, thickness 0.15mm, as rolled, 99.95+% |
| GF35327088 | Magnesium foil, thickness 0.075 mm, 4 mm diameter, purity 99.9% |
| GF35328607 | Calcium lump, 10 mm max. lump size, weight 20 g, purity 99% |