Advanced Search

aldrich Brand

Displaying 30451-30500 of 66743 results.
Sigma Cat.No.Description
GF10869958Polymethylpentene
TPX®, rod, diam. 9.5 mm, L 100 mm, natural
GF10871658Aluminum-magnesium-manganese-chromium alloy, Al96.45Mg2.6Mn0.8Cr0.15
200mm tube, 2.1mm outside diameter, 0.25mm wall thickness, 1.6mm inside diameter, as drawn
GF10884337Polyethylene - U.H.M.W.
(UHMW PE), rod, diam. 6.35 mm, L 200 mm, condition machined
GF10884764Nickel
wire reel, 50m, diameter 0.25mm, as drawn, 99%
GF10886047Brass alloy, Cu63Zn37
foil, 8mm disks, 0.025mm thickness, hard
GF10892404Indium
foil, not light tested, 50x50mm, thickness 0.015mm, 99.8%
GF10893168Tin
foil, 6mm disks, thickness 0.075mm, as rolled, 98.8%
GF10902923Zirconium
foil, 15mm disks, thickness 0.02mm, 99.2%
GF10903676Dysprosium
foil, 50x50mm, thickness 0.1mm, as rolled, 99%
GF10904600Inconel® 625 - corrosion resistant alloy, Ni61Cr22Mo9Fe5
foil, 4mm disks, 0.025mm thickness, annealed
GF10906613Ethylene-Tetrafluoroethylene Copolymer
(ETFE), film, thickness 0.125 mm, L 1 m
GF10907377Silicon
rod, 80mm, diameter 20mm, single crystal, -100, 99.999%
GF10927380Magnesium
foil, thickness 0.0125 mm, size 100 × 100 mm, purity 99.9%
GF10928752Copper
powder, max. particle size 5 micron, weight 50 g, purity 99.8%
GF10928921Polyetheretherketone
(PEEK), tube, outside diameter 3.2mm, L 500 mm, wall thickness 0.6 mm
GF10931947Silver
foil, 0.5m coil, thickness 0.01mm, 99.95+%
GF10938449Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
foil, 5m coil, 0.15mm thickness, annealed
GF10944457Nickel
rod, 1.5 mm diameter, length 100 mm, purity 99%
GF10945773Silver
wire, 0.1 mm diameter, length 100 m, purity 99.99%
GF10946314Titanium/Aluminum/Vanadium
foil, Ti 90%/Al 6%/V 4%, thickness 0.05 mm, length 0.5 m, coil width 120 mm
GF10946358Polyoxymethylene/Acetal Copolymer - 10% Carbon Fiber Reinforced
(POMC - 10% CFR), granule, 3 mm nominal granule size, weight 2000 g, black
GF10948417Nickel aluminide
powder, max. particle size 150 micron, weight 50 g, 45 μm mean particle size
GF10948484Silver
foil, 25mm disks, thickness 0.003mm, 99.9%
GF10953851Tungsten-chromium alloy, W90Cr10
powder, 45micron max. particle size, alloy pre-cursor, 200g
GF10954177Tin oxide
powder, max. particle size 150 micron, weight 100 g
GF10954335Stainless Steel - AISI 316 alloy, FeCr18Ni10Mo3
1000mm rod, 12.7mm diameter
GF10969117Lead
foil, 10mm disks, thickness 0.15mm, as rolled, 99.95%
GF10969230Nickel-chromium alloy, Ni80Cr20
25m wire, 0.75mm diameter, annealed
GF10973235Copper
foil, thickness 0.0125 mm, length 0.5 m, purity 99.9%
GF10973550Aluminum
wire reel, 50m, diameter 0.5mm, as drawn, 99.999%
GF10974269Lead
foil, thickness 0.20 mm, 50 mm diameter, purity 99.95%
GF10987757Lead
foil, 25x25mm, thickness 0.25mm, as rolled, 99.99+%
GF10995914Copper
tube, 100mm, outside diameter 5.0mm, inside diameter 4mm, wall thickness 0.5mm, as drawn, 99.9%
GF10999592Phosphor bronze alloy, Cu94Sn6
foil, 2m coil, 0.05mm thickness, as rolled
GF10999738Aluminum
foil, thickness 0.20 mm, 10 mm diameter, purity 99%
GF11001564Palladium
microfoil, disks, 25mm, thinness 0.05μm, specific density 63.6μg/cm2, permanent mylar 3.5μm support, 99.99%
GF11002149Molybdenum
foil, not light tested, 100x100mm, thickness 0.01mm, 99.9%
GF11004129Polycarbonate
(PC), film, thickness 0.5 mm, size 300 × 300 mm, translucent white 82728
GF11007021Tin
foil, 100x100mm, thickness 1.5mm, as rolled, 99.99+%
GF11019697Nickel
wire reel, 5m, diameter 0.025mm, as drawn, 99.6+%
GF11021094Manganese
rod, 10mm, diameter 4.0mm, cast, 99.5%
GF11034829Constantan - resistance alloy, Cu55Ni45
foil, 2m coil, 305mm coil width, 0.025mm thickness, as rolled
GF11035358Tin
foil, 15mm disks, thickness 1.0mm, as rolled, 99.99+%
GF11040095Gold
foil, thickness 0.005 mm, size 150 × 150 mm, purity 99.9%
GF11044909Inconel® X750 - heat resisting alloy, Ni74Cr15Fe7TiAlNb
100m wire, 1.0mm diameter, annealed
GF11050962Nickel-beryllium-titanium alloy, Ni97.5Be1.95Ti0.5
foil, 0.2m coil, 0.2mm thickness
GF11051558Beryllium
wire reel, 0.5m, diameter 0.05mm, annealed and clean, 99.7%
GF11053606Aluminum
wire reel, 5m, diameter 0.30mm, as drawn, 99.5%
GF11054225Aluminium alloy 2024
foil, Al 93.5%/Cu 4.5%/Mg 1.5%/Mn 0.5%, thickness 2.5 mm, size 150 × 150 mm, temper t3
GF11060211Polytetrafluoroethylene Filled With Glass
(PTFE 25% GF), rod, diam. 25 mm, L 1000 mm

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top