Advanced Search

aldrich Brand

Displaying 29251-29300 of 66743 results.
Sigma Cat.No.Description
GF06041775Lead
foil, not light tested, 50x50mm, thickness 0.01mm, 99.99+%
GF06047917Copper
foil, thickness 0.068 mm, size 25 × 25 mm, purity 99.95%
GF06050146Stainless Steel - AISI 321 alloy, FeCr18Ni9Ti
foil, 150 x 150mm, 0.015mm thickness, as rolled, light tight (lt)
GF06058177Copper
foil, thickness 0.0076 mm, length 2 m, coil width 6 mm
GF06067829Invar® - Controlled Expansion Alloy, Fe64Ni36
5m wire, 1.5mm diameter, annealed
GF06068763Copper - O.F.H.C.
tube, 100mm, outside diameter 1.23mm, inside diameter 0.51mm, wall thickness 0.36mm, 99.95+%
GF06074120Aluminum
wire reel, 0.5m, diameter 1.0mm, as drawn, 99.999%
GF06077853Titanium
foil, thickness 0.0025 mm, size 50 × 50 mm, purity 99.6+%
GF06078427Silver
insulated wire, 2m, conductor diameter 0.05mm, insulation thickness 0.0075mm, polyester insulation, 99.99%
GF06082286Titanium
microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm2, permanent mylar 3.5μm support, 99.6+%
GF06086369Copper
foil, thickness 0.022 mm, length 50 m, coil width 6.5 mm
GF06089474Titanium
foil, thickness 0.004 mm, 8 mm diameter, purity 99.6+%
GF06099666Carbon
rod, 150mm, diameter 50mm, graphite, 99.95%
GF06102313Molybdenum
foil, thickness 2.0 mm, size 20 × 20 mm, purity 99.9%
GF06105743Platinum
rod, 50mm, diameter 1.0mm, 99.95%
GF06128883Praseodymium
rod, 50mm, diameter 6.35mm, cast, 99%
GF06129389Inconel® alloy 600 - heat resisting alloy, Ni72Cr16Fe8
foil, 15mm disks, 0.075mm thickness, annealed
GF06131382Monel® alloy 400, Ni65Cu33Fe2
200mm tube, 2.57mm outside diameter, 0.15mm wall thickness, 2.27mm inside diameter, as drawn
GF06132563Tungsten-rhenium alloy, W97Re3
200m wire, 0.01mm diameter, as drawn
GF06133711Polyethylene Terephthalate
(polyester, PET, PETP), metallized film, thickness 0.005 mm, L 10 m, coil width 315 mm
GF06136826Stainless Steel - AISI 430 alloy, Fe81Cr17MnSiCSP
foil, 1m coil, 0.15mm thickness, annealed
GF06140629Tungsten-rhenium alloy, W75Re25
1m wire, 0.35mm diameter, annealed
GF06141170Polymethylpentene
TPX®, rod, diam. 12.7 mm, L 400 mm, natural
GF06141260Polyimide
(PI), rod, diam. 25.4 mm, L 50 mm, grade meldin 7001
GF06143509Glass Sealing Alloy, Fe54Ni29Co17
100mm rod, 6.35mm diameter
GF06146805Tungsten
foil, not light tested, 25x25mm, thickness 0.004mm, 99.95%
GF06151845Titanium-aluminum alloy, Ti78Al22
powder, 75micron max. particle size, alloy pre-cursor, 100g
GF06155344Zirconium
foil, 25mm disks, thickness 0.075mm, annealed, 99.2%
GF06158729Molybdenum
foil, 8mm disks, thickness 0.75mm, annealed, 99.9%
GF06160171Polyvinylidenefluoride
(PVDF), granule, 5 mm nominal granule size, weight 500 g, condition additive free polymer
GF06165839Manganin® - resistance alloy, Cu86Mn12Ni2
10m wire, 0.4mm diameter, annealed
GF06166740Polyethylene Terephthalate
(polyester, PET, PETP), mesh, nominal aperture 21ám, size 500 × 500 mm, monofil diameter 41ám
GF06171151Iron
foil, 50x50mm, thickness 2.0mm, as rolled, 99.95%
GF06171476Nickel
foil, 1m coil, thickness 0.05mm, 99.9%
GF06176303Silver
foil, 6mm disks, thickness 1.0mm, as rolled, 99.95+%
GF06176448Glass Sealing Alloy, Fe54Ni29Co17
foil, 15mm disks, 0.05mm thickness, annealed, flattened
GF06180982Evanohm® - precision resistance alloy, Ni75Cr20Al2.5Cu2.5
foil, 25mm disks, 0.025mm thickness, annealed
GF06182940Gold
tube, 50mm, outside diameter 1.0mm, inside diameter 0.5mm, wall thickness 0.25mm, as drawn, 99.95%
GF06194077Copper
wire reel, 25m, diameter 1.0mm, annealed, 99.9%
GF06197014Aluminum
rod, 200mm, diameter 10.0mm, as drawn, 99.999%
GF06203483Polyoxymethylene - Homopolymer
(acetal - homopolymer POMH), sheet, thickness 10 mm, size 300 × 300 mm
GF06207274Iron
foil, 5m coil, thickness 0.125mm, hard, 99.5%
GF06208208Gold-nickel alloy, Au82Ni18
1m wire, 0.025mm diameter, annealed
GF06209007Copper
foil, thickness 0.125 mm, length 5 m, coil width 76.2 mm
GF06217006Silicon carbide
powder, max. particle size 0.05 micron, weight 100 g, purity 99%
GF06228806Copper-beryllium alloy, Cu98Be2
foil, 15mm disks, 0.05mm thickness, half hard
GF06230922Carbon - Vitreous
foam, 300x300mm, thickness 30mm, bulk density 0.05g/cm3, porosity 96.5%
GF06236063Iridium
wire reel, 1m, diameter 0.125mm, as drawn, 99.5%
GF06241496Constantan - resistance alloy, Cu55Ni45
50m wire, 0.125mm diameter, annealed
GF06243713Polyphenylenesulfide
(PPS), washer, size m8, length 10 pcs, outside diameter 17 mm

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top