WSFA-2
SUPELCO/47056 - 0.1 wt. % each component in deionized water
EC Number: 231-791-2
Product Type: Chemical
This image is provided for informative purposes only and does not represent an actual product label. It should not be used as a substitute for official product labeling.
| CofA | current certificate can be downloaded |
| concentration | 0.1 wt. % each component in deionized water |
| description | qualitative standard |
| format | multi-component solution |
| packaging | pkg of 1 × 5 mL |
| Quality Level | 100  |
| storage temp. | 2-30°C |
| technique(s) | gas chromatography (GC): suitable |
| HPLC: suitable |
| Application: | Refer to the product′s Certificate of Analysis for more information on a suitable instrument technique. Contact Technical Service for further support. |
| General description: | WSFA-2 may be used for identifying and quantifying purgeable halocarbons in municipal and industrial wastewater in accordance with EPA 624 method. The pre-requisite of EPA 624 method is the use of gas chromatography with a selective detector or gas chromatography/mass spectrometry. WSFA-2 may also be utilized for the qualitative determination of free fatty acids in aqueous solutions. It is recommended that it should be purchased from chemical manufacturers with knowledge in the preparation, handling, storage, and shipment of volatile analytes. |
| RIDADR | NONH for all modes of transport |
| WGK Germany | nwg |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Storage Temp. | 2-30°C |
| UNSPSC | 12164500 |
| Components | Acetic acid; Butyric acid; Isobutyric acid; Isovaleric acid; Propionic acid; Valeric acid |