Metal Packed GC Column (fits Agilent, Configuration "A")
SUPELCO/12792-U - phase none, matrix 80/100 Porapak Q support, L × O.D. × I.D. 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm
Product Type: Equipment/Book
column type | packed GC |
compatibility | for use with Agilent Configuration A |
L × O.D. × I.D. | 6.0 ft (1.8 m) × 1/8 in. × 2.1 mm |
manufacturer/tradename | Agilent |
material | stainless steel column |
matrix | 80/100 Porapak Q support |
matrix active group | none phase |
parameter | 0-250 °C temperature (isothermal or programmed) |
Quality Level | 100 |
technique(s) | gas chromatography (GC): suitable |
Application: | Porapak Q packed in a stainless steel GC column maybe used for oxidation reduction experiments for designing of appropriate surface sites for ruthenium-ceria catalysts supported on graphite by controlled preparation method. |
General description: | An economical metal column should be used for less demanding applications where the inertness of glass is not required. This column fits Agilent 5880, 5890, 6890, 7820, and 7890 (configuration A, on-column injection, all detectors except TCD). |
General description: | Packed column made up of stainless steel are basically used when higher carrier gas flow rates are employed as they can sustain elevated pressure. Stainless steel columns are usually washed with dilute hydrochloric acid, then with water followed by methanol, acetone, methylene dichloride and n-hexane in order to remove any corrosion products and traces of lubricating agents. |
RIDADR | NONH for all modes of transport |
WGK Germany | WGK 3 |
Flash Point(F) | Not applicable |
Flash Point(C) | Not applicable |
UNSPSC | 41115710 |