Advanced Search



Anti-EGR1 Antibody, clone 1F22 ZooMAb® Rabbit Monoclonal

SIGMA/ZRB1721 - recombinant, expressed in HEK 293 cells

Synonym: Early growth response protein 1;AT225;Nerve growth factor-induced protein A;NGFI-A;Transcription factor ETR103;Transcription factor Zif268;Zinc finger protein 225;Zinc finger protein Krox-24

Product Type: Chemical

Catalog Number PKG Qty. Price Quantity
45-ZRB1721-25UL
No Price  
45-ZRB1721-4X25UL
No Price  
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) Human Prostate (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Nuclear staining was observed in glandular cells & stroma of Human Prostate tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) Human Prostate (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Nuclear staining was observed in glandular cells & stroma of Human Prostate tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) Human Prostate (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Nuclear staining was observed in glandular cells & stroma of Human Prostate tissue sections.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of PC3 cells was performed using a 1:100 dilution of Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the nucleus.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of PC3 cells was performed using a 1:100 dilution of Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the nucleus.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of PC3 cells was performed using a 1:100 dilution of Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the nucleus.
Western Blotting Enhanced Validation - Recombinant Antibody Technology Lysates from HeLa (Lane 1) and PC3 (Lane 2) cells were probed with Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal (1:1,000 dilution). Proteins were visualized using a Donkey Anti-Rabbit IgG secondary antibody conjugated to HRP and a chemiluminescence detection system. Arrow indicates EGR1 (~80 kDa).
Affinity Binding Assay Enhanced Validation - Recombinant Antibody Technology 100 mg/mL of non-specific control peptide (Run 1) or EGR1 peptide (Run 2) were analyzed by affinity binding assay using Cat. No. ZRB1721, Anti-EGR1, clone 1F22 ZooMAb® Rabbit Monoclonal. The binding of this antibody to EGR1 peptide displayed a KD of 1.3 x 10-8, whereas binding to non-specific control peptide displayed a KD of 2.9 x 10-3.
12 Principles of Green Chemistry: Principle 1—Waste Prevention.  This product has a smaller environmental footprint through reduction of waste in the manufacturing process.
12 Principles of Green Chemistry: Principle 4—Designing Safer Chemicals
Chemical products should be designed to affect their desired function while minimizing their toxicity.
12 Principles of Green Chemistry: Principle 6—Design for Energy Efficiency.  This product was re-engineered to utilize less energy in the manufacturing process.

 

antibody form purified antibody
antibody product type primary antibodies
biological source rabbit
clone 1F22, recombinant monoclonal
conjugate unconjugated
description recombinant, expressed in HEK 293 cells
enhanced validation recombinant expression
Learn more about Antibody Enhanced Validation 
epitope sequence N-terminal half
form lyophilized
greener alternative category Aligned 
greener alternative product characteristics Waste Prevention
Designing Safer Chemicals
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry .
isotype IgG
mol wt calculated mol wt 57.51 kDa
  observed mol wt ~80 kDa
packaging antibody small pack of 25 μL
product line ZooMAb® learn more 
Protein ID accession no. NP_001955 
purified by using Protein A
Quality Level 200 
recombinant expressed in HEK 293 cells
shipped in ambient
species reactivity human
species reactivity (predicted by homology) monkey
storage temp. 2-8°C
technique(s) affinity binding assay: suitable
  immunocytochemistry: suitable
  immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
  western blot: suitable
UniProt accession no. P18146 
Application: Quality Control Testing

Evaluated by Western Blotting in HeLa cell lysate.

Western Blotting Analysis: A 1:1,000 dilution of this antibody detected EGR1 in HeLa cell lysate.

Tested applications

Western Blotting Analysis: A 1:1,000 dilution from a representative lot detected EGR1 in PC3 cell lysate.

Immunohistochemistry (Paraffin) Analysis: A 1:100 dilution from a representative lot detected EGR1 in human prostate tissue sections.

Immunocytochemistry Analysis: A 1:100 dilution from a representative lot detected EGR1 in PC3 cells.

Affinity Binding Assay: A representative lot of this antibody bound EGR1 with a KD of 1.3 x 10-8 in an affinity binding assay.

Note: Actual optimal working dilutions must be determined by end user as specimens, and experimental conditions may vary with the end user.
Disclaimer: Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
General description: We are committed to bringing you greener alternative products, which adhere to one or more of The 12 Principles of Green Chemistry.This antibody is Preservative-free, produced without the harm or sacrifice of animals and exceptionally stable to allow for ambient shipping and storage if needed and thus aligns with "Waste Prevention", "Designing Safer Chemicals" and "Design for Energy Efficiency". Click here  for more information.
General description: ZooMAb® antibodies represent an entirely new generation of recombinant monoclonal antibodies.

Each ZooMAb® antibody is manufactured using our proprietary recombinant expression system, purified to homogeneity, and precisely dispensed to produce robust and highly reproducible lot-to-lot consistency. Only top-performing clones are released for use by researchers. Each antibody is validated for high specificity and affinity across multiple applications, including its most commonly used application. ZooMAb® antibodies are reliably available and ready to ship when you need them.
Immunogen: KLH-conjugated linear peptide corresponding to 23 amino acids from the N-terminal half of human Early growth response protein 1 (EGR1).
Legal Information: ZooMAb is a registered trademark of Merck KGaA, Darmstadt, Germany
Physical form: Purified recombinant rabbit monoclonal antibody IgG, lyophilized in PBS, 5% Trehalose, normal appearance a coarse or translucent resin. The PBS/trehalose components in the ZooMAb formulation can have the appearance of a semi-solid (bead like gel) after lyophilization. This is a normal phenomenon. Please follow the recommended reconstitution procedure in the data sheet to dissolve the semi-solid, bead-like, gel-appearing material. The resulting antibody solution is completely stable and functional as proven by full functional testing. Contains no biocide or preservatives, such as azide, or any animal by-products. Larger pack sizes provided as multiples of 25 μL.
Reconstitution: 30 μg/mL after reconstitution at 25 μL per vial. Please refer to guidance on suggested starting dilutions and/or titers per application and sample type.
Specificity: Clone 1F22 is a ZooMAb® Rabbit recombinant monoclonal antibody that specifically detects Early growth response protein 1 (EGR1). It targets an epitope within 23 amino acids from the N-terminal half.
Storage and Stability: Recommend storage of lyophilized product at 2-8°C; Before reconstitution, micro-centrifuge vials briefly to spin down material to bottom of the vial; Reconstitute each vial by adding 25 μL of filtered lab grade water or PBS; Reconstituted antibodies can be stored at 2-8°C, or -20°C for long term storage. Avoid repeated freeze-thaws.
Target description: Early growth response protein 1 (UniProt: P18146; also known as EGR-1, AT225, Nerve growth factor-induced protein A, NGFI-A, Transcription factor ETR103, Transcription factor Zif268, Zinc finger protein 225, Zinc finger protein Krox-24) is encoded by the EGR1 (also known as KROX24, ZNF225) gene (Gene ID: 1958) in human. EGR1 is a member of the EGR C2H2-type zinc-finger protein family that serves as a transcriptional regulator. It recognizes and binds to the DNA sequence 5′-GCG(T/G)GGGCG-3′(EGR-site) in the promoter region of target genes and regulates their transcription. It contains three C2H2-type Zinc fingers (a 338-362, 368-390, 396-418). The first, most N-terminal zinc finger binds to the 3′-GCG motif, the middle zinc finger interacts with the central TGG motif, and the C-terminal zinc finger binds to the 5′-GCG motif. It is shown to binds double-stranded target DNA, irrespective of the cytosine methylation status. It displays reduced affinity for target DNA where cytosines have been oxidized to 5-hydroxymethylcytosine and does not bind target DNA where cytosines have been oxidized to 5-formylcytosine or 5-carboxylcytosine. EGR1 plays an important role in regulating the response to growth factors, DNA damage, and ischemia. It is reported to activate the expression of p53/TP53 and TGFB1, and thereby prevents tumor formation and is shown to be essential for normal progress through mitosis and normal proliferation of hepatocytes after partial hepatectomy. It is also regulates the expression of proteins such as IL-1b and CXCL2 that are involved in inflammatory processes and development of tissue damage after ischemia. This ZooMAb® recombinant monoclonal antibody, generated by our propriety technology, offers significantly enhanced specificity, affinity, reproducibility, and stability over conventional monoclonals. (Ref.: Zandarashvili, L., et al. (2015). FEBS Lett. 589(15); 1748-1753; Hashimoto, H., et al. (2014). Genes Dev. 28(20); 2304-2313).
Storage Temp. 2-8°C
UNSPSC 12352203

The following items have been added to your cart:

Choose a favorite list for this item:

Catalog Number Description Price
$

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top