Advanced Search



Anti-CD11c Antibody, clone 1D6 ZooMAb® Rabbit Monoclonal

SIGMA/ZRB1287 - recombinant, expressed in HEK 293 cells

Product Type: Chemical

Catalog Number PKG Qty. Price Quantity
45-ZRB1287-25UL 25 µL
$223.00
1/EA
Add To Favorites
45-ZRB1287-4X25UL 25 µL
$460.00
1/EA
Add To Favorites
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human tonsil (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Membranous staining was observed in both germinal center and non-germinal centers of human tonsil tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human tonsil (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Membranous staining was observed in both germinal center and non-germinal centers of human tonsil tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human tonsil (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Membranous staining was observed in both germinal center and non-germinal centers of human tonsil tissue sections.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of THP-1 cells was performed using a 1:100 dilution of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the membrane.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of THP-1 cells was performed using a 1:100 dilution of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the membrane.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of THP-1 cells was performed using a 1:100 dilution of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488 (Green). Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the membrane.
Western Blotting Enhanced Validation - Recombinant Antibody Technology THP-1 cell lysate was probed with Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal (1:1,000 dilution). Proteins were visualized using a Donkey Anti-Rabbit IgG secondary antibody conjugated to HRP and a chemiluminescence detection system. Arrow indicates CD11c (~130 kDa).
Flow Cytometry Enhanced Validation - Recombinant Antibody Technology Staining of one million THP-1 cells was performed using 1 μg of Cat. No. ZRB1287, Anti-CD11c, clone 1D6 ZooMAb® Rabbit Monoclonal (Yellow histogram) or the equivalent amount of a Rabbit IgG isotype control (Grey histogram), followed by a PE-conjugated Donkey Anti-Rabbit IgG secondary antibody.
12 Principles of Green Chemistry: Principle 1—Waste Prevention.  This product has a smaller environmental footprint through reduction of waste in the manufacturing process.
12 Principles of Green Chemistry: Principle 4—Designing Safer Chemicals
Chemical products should be designed to affect their desired function while minimizing their toxicity.
12 Principles of Green Chemistry: Principle 6—Design for Energy Efficiency.  This product was re-engineered to utilize less energy in the manufacturing process.

 

antibody form purified antibody
antibody product type primary antibodies
biological source rabbit
clone 1D6, recombinant monoclonal
conjugate unconjugated
description recombinant, expressed in HEK 293 cells
enhanced validation recombinant expression
Learn more about Antibody Enhanced Validation 
epitope sequence N-terminal
form lyophilized
greener alternative category Aligned 
greener alternative product characteristics Waste Prevention
Designing Safer Chemicals
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry .
isotype IgG
mol wt calculated mol wt 127.38 kDa
  observed mol wt ~130 kDa
packaging antibody small pack of 25 μL
product line ZooMAb® learn more 
Protein ID accession no. NP_001273304 
purified by using Protein A
Quality Level 200 
recombinant expressed in HEK 293 cells
shipped in ambient
species reactivity human
storage temp. 2-8°C
technique(s) flow cytometry: suitable
  immunocytochemistry: suitable
  immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
  western blot: suitable
UniProt accession no. P20702 
Application: Quality Control Testing

Evaluated by Western Blotting in THP-1 cell lysate.

Western Blotting Analysis: A 1:1,000 dilution of this antibody detected CD11c in THP-1 cell lysate.

Tested applications

Western Blotting Analysis: A 1:1,000 dilution from a representative lot detected CD11c in U937 cell lysate.

Immunocytochemistry Analysis: A 1:100 dilution from a representative lot detected CD11c in THP-1 cells.

Immunohistochemistry (Paraffin) Analysis: A 1:100 dilution from a representative lot detected CD11c in human tonsil tissue sections.

Flow Cytometry Analysis: 1 μg from a representative lot detected CD11c in one million THP-1 cells.

Note: Actual optimal working dilutions must be determined by end user as specimens, and experimental conditions may vary with the end user
Application: Anti-CD11c, clone 1D6 ZooMAb®, Cat. No. ZRB1287, is a recombinant Rabbit monoclonal antibody that specifically targets CD11c and is tested for use in Flow Cytometry, Immunocytochemistry, Immunohistochemistry (Paraffin), and Western Blotting.
Disclaimer: Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
General description: We are committed to bringing you greener alternative products, which adhere to one or more of The 12 Principles of Green Chemistry.This antibody is Preservative-free, produced without the harm or sacrifice of animals and exceptionally stable to allow for ambient shipping and storage if needed and thus aligns with "Waste Prevention", "Designing Safer Chemicals" and "Design for Energy Efficiency". Click here  for more information.
General description: ZooMAb® antibodies represent an entirely new generation of recombinant monoclonal antibodies.Each ZooMAb® antibody is manufactured using our proprietary recombinant expression system, purified to homogeneity, and precisely dispensed to produce robust and highly reproducible lot-to-lot consistency. Only top-performing clones are released for use by researchers. Each antibody is validated for high specificity and affinity across multiple applications, including its most commonly used application. ZooMAb® antibodies are reliably available and ready to ship when you need them.
Immunogen: KLH-conjugated linear peptide corresponding to 15 amino acids from the N-terminal, extracellular domain of human Integrin alpha-X (CD11c).
Legal Information: ZooMAb is a registered trademark of Merck KGaA, Darmstadt, Germany
Physical form: Purified recombinant rabbit monoclonal antibody IgG, lyophilized in PBS with 5% Trehalose, normal appearance a coarse or translucent resin. The PBS/trehalose components in the ZooMAb® formulation can have the appearance of a semi-solid (bead like gel) after lyophilization. This is a normal phenomenon. Please follow the recommended reconstitution procedure in the data sheet to dissolve the semi-solid, bead-like, gel-appearing material. The resulting antibody solution is completely stable and functional as proven by full functional testing. Contains no biocide or preservatives, such as azide, or any animal by-products. Larger pack sizes provided as multiples of 25 μL.
Reconstitution: 300 μg/mL after reconstitution at 25 μL per vial. Please refer to guidance on suggested starting dilutions and/or titers per application and sample type.
Specificity: Clone 1D6 is a ZooMAb® Rabbit recombinant monoclonal antibody that specifically detects CD11c. It targets an epitope within 15 amino acids form the N-terminal, extracellular domain.
Storage and Stability: Recommend storage of lyophilized product at 2-8°C; Before reconstitution, micro-centrifuge vials briefly to spin down material to bottom of the vial; Reconstitute each vial by adding 25 μL of filtered lab grade water or PBS; Reconstituted antibodies can be stored at 2-8°C, or -20°C for long term storage. Avoid repeated freeze-thaws.
Target description: Integrin alpha-X (UniProt: P20702; also known as CD11 antigen-like family member C, Leu M5, Leukocyte adhesion glycoprotein p150,95 alpha chain, Leukocyte adhesion receptor p150-95, CD11c) is encoded by the ITGAX (also known as CD11C) gene (Gene ID: 3687) in human. CD11c is a single-pass type I membrane glycoprotein that is synthesized with a signal peptide (aa 1-19), which is subsequently cleaved off to generate the mature form that contains a long extracellular domain (aa 20-1107), a transmembrane domain (aa 1108-1128), and a cytoplasmic domain (aa 1129-1163). CD11c is predominantly expressed in macrophages, monocytes, and granulocytes and along with integrin b2 it serves as a receptor for fibrinogen. It recognizes the sequence G-P-R in fibrinogen. The aXb2 heterodimer binds many ligands, including collagen type 1, iC3b, fibrinogen, ICAM-1, and lipopolysaccharide. It is reported to mediate cell-cell interaction during inflammatory responses and is especially important in monocyte adhesion and chemotaxis. The I domains of CD11 are responsible for the binding of ligands and have a unique structure with 6-7 a -helixes and 6 b sheets with interconnecting loops. In CD11c the loops on the I domain are involved in fibrinogen binding and loops a3- a4 and bD-a5 are reported to be more important for recognition of fibrinogen. This ZooMAb® recombinant monoclonal antibody, generated by our propriety technology, offers significantly enhanced specificity, affinity, reproducibility, and stability over conventional monoclonals.
WGK Germany WGK 1
Flash Point(F) Not applicable
Flash Point(C) Not applicable
Storage Temp. 2-8°C

The following items have been added to your cart:

Choose a favorite list for this item:

Catalog Number Description Price
$

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top