Advanced Search



Anti-Selenoprotein P Antibody, clone 2G23 ZooMAb® Rabbit Monoclonal

SIGMA/ZRB1020 - recombinant, expressed in HEK 293 cells

Product Type: Chemical

Catalog Number PKG Qty. Price Quantity
45-ZRB1020-25UL 25 µL
No Price  
45-ZRB1020-4X25UL 25 µL
No Price  
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human kidney (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Cytoplasmic/membranous/ECM staining was observed in subsets of tubules, intratubular space & glomeruli of human kidney tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human kidney (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Cytoplasmic/membranous/ECM staining was observed in subsets of tubules, intratubular space & glomeruli of human kidney tissue sections.
Immunohistochemistry (Paraffin) Enhanced Validation - Recombinant Antibody Technology Formalin Fixed Paraffin Embedded (FFPE) human kidney (A) and Negative control (no primary) (B) tissue sections were prepared using heat-induced epitope retrieval (HIER). Immunostaining was performed using a 1:100 dilution of Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal. Reactivity was detected using a Goat Anti-Rabbit IgG and HRP-DAB. Cytoplasmic/membranous/ECM staining was observed in subsets of tubules, intratubular space & glomeruli of human kidney tissue sections.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of HepG2 cells was performed using a 1:100 dilution of Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488. Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the nucleus.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of HepG2 cells was performed using a 1:100 dilution of Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488. Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the nucleus.
Immunocytochemistry Enhanced Validation - Recombinant Antibody Technology Immunofluorescent analysis of HepG2 cells was performed using a 1:100 dilution of Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal and visualized with a Goat Anti-Rabbit secondary antibody conjugated to Alexa Fluor® 488. Actin filaments have been labeled with phalloidin (Red). Nucleus is stained with DAPI (Blue). This antibody positively stains the nucleus.
Western Blotting Enhanced Validation - Recombinant Antibody Technology HeLa cell lysate was probed with Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal (1:10,000 dilution). Proteins were visualized using a Donkey Anti-Rabbit IgG secondary antibody conjugated to HRP and a chemiluminescence detection system. Arrow indicates Selenoprotein P (~53 kDa).
Affinity Binding Assay Enhanced Validation - Recombinant Antibody Technology 100 mg/mL of non-specific control peptide (Run 1) or Selenoprotein P peptide (Run 2) were analyzed by affinity binding assay using Cat. No. ZRB1020, Anti-Selenoprotein P, clone 2G23 ZooMAb® Rabbit Monoclonal. The binding of this antibody to Selenoprotein P peptide displayed a KD of 3.158 x 10-8 whereas binding to non-specific control peptide displayed a KD of 4.665 x 10-5.
12 Principles of Green Chemistry: Principle 1—Waste Prevention.  This product has a smaller environmental footprint through reduction of waste in the manufacturing process.
12 Principles of Green Chemistry: Principle 4—Designing Safer Chemicals
Chemical products should be designed to affect their desired function while minimizing their toxicity.
12 Principles of Green Chemistry: Principle 6—Design for Energy Efficiency.  This product was re-engineered to utilize less energy in the manufacturing process.

 

antibody form purified antibody
antibody product type primary antibodies
biological source rabbit
clone 2G23, recombinant monoclonal
conjugate unconjugated
description recombinant, expressed in HEK 293 cells
enhanced validation recombinant expression
Learn more about Antibody Enhanced Validation 
epitope sequence C-terminal half
form lyophilized
greener alternative category Aligned 
greener alternative product characteristics Waste Prevention
Designing Safer Chemicals
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry .
isotype IgG
mol wt calculated mol wt 43.17 kDa
  observed mol wt ~53 kDa
packaging antibody small pack of 25 μL
product line ZooMAb® learn more 
Protein ID accession no. NP_005401.3 
Quality Level 200 
recombinant expressed in HEK 293 cells
shipped in ambient
species reactivity human
storage temp. 2-8°C
technique(s) affinity binding assay: suitable
  immunocytochemistry: suitable
  immunohistochemistry (formalin-fixed, paraffin-embedded sections): suitable
  western blot: suitable
UniProt accession no. P49908 
Application: Quality Control Testing

Evaluated by Western Blotting in HeLa cell lysate.

Western Blotting Analysis: A 1:10,000 dilution of this antibody detected Selenoprotein P in HeLa cell lysate.

Tested applications

Immunohistochemistry (Paraffin) Analysis: A 1:100 dilution from a representative lot detected Selenoprotein P in human kidney tissue sections.

Immunocytochemistry Analysis: A 1:100 dilution from a representative lot detected Selenoprotein P in HepG2 cells.

Affinity Binding Assay: A representative lot of this antibody bound Selenoprotein P peptide with a KD of 3.158 x 10-8 in an affinity binding assay.

Note: Actual optimal working dilutions must be determined by end user as specimens, and experimental conditions may vary with the end user
Application: Anti-Selenoprotein P, clone 2G23 ZooMAb®, Cat. No. ZRB1020, is a Rabbit monoclonal antibody that target Selenoprotein P and is tested for use in Affinity Binding Assay, Immunocytochemistry and Immunohistochemistry (Paraffin), and Western Blotting.
Disclaimer: Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
General description: We are committed to bringing you greener alternative products, which adhere to one or more of The 12 Principles of Green Chemistry.This antibody is Preservative-free, produced without the harm or sacrifice of animals and exceptionally stable to allow for ambient shipping and storage if needed and thus aligns with "Waste Prevention", "Designing Safer Chemicals" and "Design for Energy Efficiency". Click here  for more information.
General description: ZooMAb® antibodies represent an entirely new generation of recombinant monoclonal antibodies.

Each ZooMAb® antibody is manufactured using our proprietary recombinant expression system, purified to homogeneity, and precisely dispensed to produce robust and highly reproducible lot-to-lot consistency. Only top-performing clones are released for use by researchers. Each antibody is validated for high specificity and affinity across multiple applications, including its most commonly used application. ZooMAb® antibodies are reliably available and ready to ship when you need them.

Learn more about ZooMAb here. 
Immunogen: KLH-conjugated linear peptide corresponding to 23 amino acids from the C-terminal half of human Selenoprotein P.
Legal Information: ZooMAb is a registered trademark of Merck KGaA, Darmstadt, Germany
Physical form: Purified recombinant rabbit monoclonal antibody IgG, lyophilized in PBS with 5% Trehalose, normal appearance a coarse or translucent resin. The PBS/trehalose components in the ZooMAb formulation can have the appearance of a semi-solid (bead like gel) after lyophilization. This is a normal phenomenon. Please follow the recommended reconstitution procedure in the data sheet to dissolve the semi-solid, bead-like, gel-appearing material. The resulting antibody solution is completely stable and functional as proven by full functional testing. Contains no biocide or preservatives, such as azide, or any animal by-products. Larger pack sizes provided as multiples of 25 μL.
Reconstitution: 300 μg/mL after reconstitution at 25 μL per vial. Please refer to guidance on suggested starting dilutions and/or titers per application and sample type.
Specificity: Clone 2G23 is a ZooMAb® rabbit recombinant monoclonal antibody that specifically detects Selenoprotein P. It targets an epitope within 23 amino acids from the C-terminal half.
Storage and Stability: Recommend storage of lyophilized product at 2-8°C; Before reconstitution, micro-centrifuge vials briefly to spin down material to bottom of the vial; Reconstitute each vial by adding 25 μL of filtered lab grade water or PBS; Reconstituted antibodies can be stored at 2-8°C, or -20°C for long term storage. Avoid repeated freeze-thaws.
Target description: Selenoprotein P (UniProt: P49908; also known as SeP) is encoded by the SELENOP (also known as SELP, SEPP1) gene (Gene ID: 6414) in human. Selenoprotein P is a secreted glycoprotein that is synthesized mainly in the liver and secreted into the plasma. It contains most of the selenium in plasma. It is synthesized with a signal peptide (aa 1-19), which is subsequently cleaved off in the mature form. Secreted form of selenoprotein P is made up of two domains. The larger N-terminal domain contains one selenocysteine (U) in a U-x-x-C redox motif and the shorter C-terminal domain contains nine selenocysteines. It is shown to bind to heparin in a pH-sensitive manner at the heparin-binding site in its N-terminal region that contains two histidine residues that become protonated, and therefore can bind heparin. Selenoproteins provide a key defense against oxidative stress, as many of these proteins participate in oxidation-reduction reactions neutralizing reactive oxygen species, where selenocysteine residues act as catalytic sites. Selenoprotein P is removed from plasma by glomerular filtration by endocytosis mediated by LRP2 in the proximal tubule epithelium. This ZooMAb® recombinant monoclonal antibody, generated by our propriety technology, offers significantly enhanced specificity, affinity, reproducibility, and stability over conventional monoclonals. (Ref.: Burk, RF., and Hill, KE. (2009). Biochim. Biophys. Acta 1790(11); 1441-1447).
WGK Germany WGK 1
Storage Temp. 2-8°C

The following items have been added to your cart:

Choose a favorite list for this item:

Catalog Number Description Price
$

Returns/Order support

Please fill out the form below if you want to request order support from Krackeler Scientific.


Quick Order

* Required


New Year Price Updates

We are currently working diligently to update our website pricing information for the New Year. If you place an order, you will be acknowledged with any corrected pricing. If you'd like the most current information sooner, please don't hesitate to drop us an email or give us a call and we'd be happy to assist. Thank you for your patience while we are updating.

800-334-7725
office@krackeler.com


Play Video

To Request a Quote

  1. Search or Browse for items and add to them to your Shopping Cart.
  2. Click the "Request Quote" button at the bottom of the Shopping Cart page.
  3. Fill out required fields.
  4. Optionally you can convert to standard checkout mode by choosing a payment type.
  5. Click "Request Quote" at the bottom of the page.

You will be contacted with a quote.

To Order From a Quote

  1. Register and login to the website.
  2. Receive a quote from your sales representative or customer service.
  3. Have your copy of the quote in hand.
  4. Visit our quote module to search for your quote.
Back to Top