Whatman® PolyVENT and Sterivent intregal filters
ALDRICH/Z744042 - PolyVENT 500, inlet 1/4 to 3/8 inch SB, outlet 1/4 to 3/8 inch SB
Synonym: Whatman filter; disposable filter; filter Whatman
Product Type: Equipment/Book
| diam. | 16 mm |
| fitting | inlet 1/4 to 3/8 inch SB |
| outlet 1/4 to 3/8 inch SB | |
| manufacturer/tradename | Whatman 6713-1651 |
| Whatman Article No. 28420174 (US reference) | |
| material | polypropylene housing |
| PTFE membrane | |
| packaging | 1 ea of |
| pore size | 0.2 μm |
| sterility | non-sterile |
| General description: | GE’s Whatman PolyVENT filters are integral venting filters that work bidirectionally to prevent contaminants from entering vessels like fermentation tanks during draining or filling. • 0.2 μm hydrophobic PTFE air filters are ideal industrial air filter media • Validated for 50 steam autoclave cycles; compatible with ethylene oxide (EtO) • Testable by water break through (WBT) test or bubble point testing • Passes USP Class VI biosafety tests for plastics • Manufactured in clean room facilities • Range of filtration areas from 4–1000 cm2 to support filtration volumes as small as one liter and as large as a large tank vessel GE′s Whatman SteriVENT filters, venting filters with an integral PTFE membrane, are well suited for sterile venting of vessels and tanks during draining and filling. • Hydrophobic 0.2 μm PTFE membrane makes SteriVENT a high-quality PTFE air filter • Can be autoclaved 50 times without loss of performance; compatible with ethylene oxide (EtO) • Integrity can be tested with the water break through (WBT) test • Range from 16–2000 cm2 of filtration area to support even large process tanks |
| Legal Information: | Whatman is a registered trademark of Cytiva |
| Other Notes: | Global SIAL customers (excluding Japan) can now order any product from the Cytiva Life Sciences consumables portfolio (prepack only) using GE′s product numbering system. The legacy GE Whatman products that use the SIAL "Z" product numbering system will be discontinued and directly replaced with a product number using a "WHA" prefix plus the GE product code. For reference, the legacy "Z" product number is identified as a synonym on the "WHA" product number listing. |
| Other Notes: | This product has been replaced by WHA67135036-ALDRICH | Whatman PolyVENT and Sterivent intregal filters, PolyVENT 500, inlet 1/4 to 3/8 inch SB, outlet 1/4 to 3/8 inch SB  |
| UNSPSC | 41104900 |