Whatman® in-line HEPA filtration units
ALDRICH/WHA67027500 - Hepa-Cap 75, inlet for 3/8" FNPT to 1/2" stepped barb, outlet for 3/8" FNPT to 1/2" stepped barb
Synonym: Z743615; in line Hepa filters; in line filters
Product Type: Equipment/Book
| diam. | 75 mm |
| fitting | inlet for 3/8" FNPT to 1/2" stepped barb |
| outlet for 3/8" FNPT to 1/2" stepped barb | |
| manufacturer/tradename | Whatman 6702-7500 |
| Whatman Article No. 28420115 (US reference) | |
| material | glass fiber-reinforced polypropylene membrane |
| polypropylene housing | |
| packaging | pkg of 1 ea |
| pore size | 0.3 μm |
| sterility | non-sterile |
| Features and Benefits: | • Used across scientific, research, and industrial environments in a variety of air and gas filtration applications that require high particle retention and the ability to capture dirt and debris at high flow rates. • In-line filter capsules are particularly suitable for sterile venting of fermenters or reaction vessels to prevent airborne particles from entering or exiting the vessel. • Well suited for tissue culture, in-line filtration, and prefiltration for suction or to serve gas in-line filters. • Strengthened by dual lamination with a tough polyester monofilament. • Filters are pleated to maximize surface area for high particle retention and high flow rate • Typical retention efficiency: 99.97% of all particles >= 0.3 µm in air • Depth filter design: allows for high loading capacity and bi-directional flow • Repeatedly autoclavable: at 121°C for 20 minutes (132°C max) |
| General description: | Whatman HEPA-CAP Vent Filters are high-retention and high flow-rate glass fiber filters that are commonly used in both research and industry to remove particulates from air and gases. |
| Legal Information: | Whatman is a registered trademark of Cytiva |
| Other Notes: | Field of Use : For internal research use only. Products are not intended for diagnostic use or resale. |
| UNSPSC | 41104922 |