Pyrex® square media storage bottle
ALDRICH/CLS1396250 - with screw cap, capacity 250 mL
Synonym: Pyrex® media bottles; bottle; glass media bottles; media bottle; media bottle; pyrex bottle; pyrex bottles
Product Type: Equipment/Book
| capacity | 250 mL |
| feature | autoclavable |
| cap | |
| disposable | |
| graduations | |
| subdivision 50 mL | |
| fitting | GL 45 neck thread |
| manufacturer/tradename | Corning 1396-250 |
| material | borosilicate glass bottle |
| clear bottle | |
| orange polypropylene cap (plug seal) | |
| square bottle | |
| wide-mouth bottle | |
| O.D. × H | 64 mm × 138 mm |
| packaging | case of 10 ea |
| pack of 10 ea | |
| sterility | non-sterile |
| General description: | Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. They include a linerless, one-piece autoclavable orange polypropylene plug seal cap and a drip-free pouring ring |
| General description: | These heavy duty 250mL square bottles are manufactured from PYREX borosilicate glass for chemical and thermal resistance. Square bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage. Features include white enamel graduations, large marking spot and a glass ridge molded into the bottle to indicate full capacity. Bottles include a linerless, one-piece autoclavable orange GL45 threaded polypropylene plug seal cap and a drip-free pouring ring. -Caution: Square bottles should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles: -Polypropylene colored caps for ease of sorting and identification. -Vented membrane cap with 0.22 μm PTFE hydrophobic membrane. -PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C). -PBT caps with silicone septa for syringe sampling or introduction of reagents. |
| Legal Information: | PYREX is a registered trademark of Corning, Inc. |
| UNSPSC | 41121800 |