Pyrex® round media storage bottles and reusable screw caps
ALDRICH/CLS139550 - capacity 50 mL
Synonym: Pyrex® media bottles; glass media bottles; laboratory bottles; plastic bottle; plastic bottles; round bottles; storage bottle
Product Type: Equipment/Book
| availability | not available in EU |
| capacity | 50 mL |
| diam. × H | 46 mm × 88 mm |
| feature | autoclavable |
| cap | |
| graduations | |
| reusable | |
| fitting | GL 32 neck thread |
| manufacturer/tradename | Corning 1395-50 |
| material | borosilicate glass bottle |
| clear bottle | |
| cylindrical bottle | |
| narrow-mouth bottle | |
| orange polypropylene cap (plug seal) | |
| packaging | case of 10 |
| sterility | non-sterile |
| General description: | Pyrex heavy-duty round media storage bottles can be used for storage as well as for mixing and sampling. These media storage bottles Include linerless, one-piece, autoclavable, orange PP plug-seal caps with drip-free pouring rings. Optional red PBTP caps and red ETFE pouring rings are available separately, for dry heat sterilization (180°C). Pyrex round media storage bottles are made of borosilicate glass with permanent, white enamel graduations and marking spots. Caution: Bottles larger than 2 L should NOT be used with bottle-top filter units or in other applications involving vacuum/pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. A wide range of optional caps are available for these bottles: • Vented membrane cap with 0.22 μm PTFE hydrophobic membrane • Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C) • PBT caps with silicone septa for syringe sampling or introduction of reagents |
| General description: | These heavy duty 50 mL PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL32 threaded cap and a drip-free pouring ring. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Bottles have permanent white enamel graduations and marking spots. Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. |
| Legal Information: | PYREX is a registered trademark of Corning, Inc. |
| UNSPSC | 41121800 |