Indium tin oxide coated glass slide, rectangular
ALDRICH/576352 - surface resistivity 70-100 Ω/sq, slide
Synonym: ITO; ITO coated slide, rectangular
CAS Number: 50926-11-9
MDL Number: MFCD00171662
Linear Formula: In2O3 · (SnO2)x
Product Type: Chemical
| InChI | 1S/2In.5O.Sn |
| InChI key | LNNWKAUHKIHCKO-UHFFFAOYSA |
| L × W × thickness | 75 mm × 25 mm × 1.1 mm |
| Quality Level | 100  |
| refractive index | n |
| SMILES string | O=[Sn]=O.O=[In]O[In]=O |
| surface resistivity | 70-100 Ω/sq |
| transmittance | >87% |
| Application: | ITO cover slides may be used for closed digital microfluidic devices and as a transparent electrodes in display and other optoelectronic devices. Some other potential uses that have been reported are: • Eumelanin samples prepared on ITO covered glass substrates. • Interface windows of the liquid cell for optical beam deflection (OBD) sensing contain a 20-nm-thick indium tin oxide film. • Mesoporous TiO2 films were formed on ITO conductive glass substrates. |
| General description: | Indium tin oxide (ITO) is widely used as transparent conducting oxides. Its major characteristics are electrical conductivity, optical transparency and the ease to be deposited as films. |
| General description: | Thickness of ITO coating is 150-300 Å. Resistance may increase to as high as 375 Ω when exposed to temperatures of 300 °C for 30 minutes or more. To avoid damaging the thin film coating when determining which side is coated, lightly touch the barrelsof the probes to the same surface of a single-side coated product. Testing the alternate side will quicklyshow one with a low resistance as compared to the opposing side, which will exhibit an essentially infiniteresistance. |
| Packaging: | 10, 25 pkg in poly tube |
| Hazard Codes | Xi |
| Risk Statements | 36/37/38 |
| Safety Statements | 26 |
| RIDADR | NONH for all modes of transport |
| WGK Germany | WGK 3 |
| Flash Point(F) | Not applicable |
| Flash Point(C) | Not applicable |
| Refractive Index | n |
| UNSPSC | 12352103 |