- Use with any chart recorder or computer that can accept millivolt signals
- Unit can recall the maximum temperature achieved at the touch of a button
- HOLD key freezes display to capture current reading, °F/°C switchable
- Probe range (supplied with unit): –40 to 250°C continuous or 300°C short-term; uses all Type-K thermocouples
Recorder jack provides a millivolt signal output. This enables thermometer to be used with any chart recorder, strip recorder, or computer that accepts millivolt signals. Monitor conditions in chambers, clean rooms, food processing, scientific labs, and all temperature-sensitive manufacturing operations. Recorder output provides a hard copy for today’s stringent QC documentation requirements. Output specifications are 1 mV output per degree in 0.1° display mode and 0.1 mV output per degree in the 1° display mode. Range is –50 to 1999°F and –50 to 1300°C, with a meter-only accuracy of ±0.3% of the reading plus 1°C. Resolution is 0.1° from –50.0 to 199.9° and is 1° for other readings.
Uses all Type-K thermocouples. Large, bright, 1/2-inch-high, four-digit LCD can be read from 10 feet away. Unit is completely portable and designed for years of dependable and reliable service.
Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2005 (1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Comes ready to use with fast-response, Type-K beaded probe with 3-foot cable, 9-volt battery, recorder output jack, and Traceable® Certificate. Size is 2-3/4 x 5-1/4 x 1-1/4 inches and weight is 5-1/2 ounces. Replacement battery Cat. No. 291-1112.