A variety of accessories are available to customize your Purifier® Biosafety Cabinet. Accessories are also compatible with PuriCare® Procedure Stations.
Air-Tight Damper is manually adjustable and may be permanently fastened directly atop the Canopy Connection to provide a transition to exhaust ductwork and means to control the exhaust airflow. Type 304 stainless steel, 10" high with 10" OD inlet and outlet.
Backdraft Damper mounts in a vertical run of duct to prevent reverse pressurization of the exhaust system. Sized to fit 10" diameter ductwork.
Canopy Connections allow Cabinets to be thimble-ducted to the outside with minimal disturbance to the cabinet airflow. Thimble ducting expands the use of safety cabinets to include malodorous samples, small amounts of volatile toxic chemicals and tracer quantities of radionuclides. The canopy provides an air gap to allow room air to enter the ductwork and mix with the filtered air being exhausted to the outside. Pressure sensor with audible alarm detects exhaust airflow. Pressure relief valve opens to maintain properly balanced airflow in the cabinet should the remote blower fail. Outlet is 10" ID and accepts 10" nominal diameter ductwork.
Cord Management System includes three mounting stainless steel hooks and three carabiners. The hooks mount to the rear grille and the carabiners secure power cords and tubing along the rear wall.
Sensor Kits allow display of inflow and downflow velocities on the LCD information center. Includes airflow sensor, wiring harness and hardware. Not for use on Class II, Type B2 Cabinets. Installation and certifier calibration are required.
IV Bar Kit supports intravenous solution bottles and bags. Kit includes IV bar, mounting hardware, four hangers and instructions for installation.
Laptop Computer Arms securely support a laptop computer within easy view. Articulating arm raises, lowers and pivots to a steady position. Includes epoxy-coated steel arm and support surface with cloth loop fasteners and mounting hardware. Not for use with Hydraulic Lift Base Stands.
Interior Shelf is made of stainless steel and mounts to rear grille to provide 8" x 5" surface to place supplies. Weight capacity of 2.2lbs (1 kg).
Support Shelves provide a 8" x 20" surface to support remote equipment within easy access of the biosafety cabinet. Epoxy-coated steel shelf mounts to left-side tubular frame of base stand. Includes epoxy-coated steel shelf and fasteners. Not for use with SoLo Hydraulic Lift Base Stand.
Service Fixture Kit includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior.
Ultraviolet Lamp Kits include 254nm UV lamp, installation instructions and a ballast.
Stainless Steel Turntable holds miscellaneous items and rotates 360° to bring items within easy reach. Stainless steel surface and ball bearings. 12" diameter. Autoclavable.