Blak-Ray® B-100 Series High Intensity UV Lamps
By UVP
UVP's B-100 Series Blak-Ray® high intensity lamps supply brilliant UV irradiance for optimum fluorescence and are available in a variety of styles. All "P" series lamps come with the special heat-resistant plastic Cool-Touch™ housing which allows users to handle the lamp head regardless of how long the lamp has been operating. These rugged lamps can be placed face down on a working surface without damage to the filter. The non "P" models are built with an aluminum lamp head.
A 100-watt spot bulb is standard with all models (except the B-100SP); the bulb is rated at 5000 hours. Self-ballasted bulb included with the B-100SP has an average life of 450 to 2000 hours depending on use patterns. Flood bulb may be used in all lamps (except B-100SP). Flood bulb life is estimated at 2000 hours. The lamp head connects to the transformer base for hands free use (all models except B-100SP) allowing the lamp head to rotate a full 360°; remove the lamp from the base for additional mobility.
B-100AP and B-100AP/R
B-100AP models feature 100-watt longwave UV, Cool-Touch™ housing and ballast base. At 18 in. (457mm), the lamp produces a highly intense center of UV irradiance about 5 in. (127mm) in diameter. Lamp head can rotate 360° when attached to the base for hands-free operation or lamp can be removed from the base. 8 ft primary and secondary cords. For added mobility, select the B-100AP/R which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
B-100A and A-100AR
The longwave B-100A is manufactured with a scratch-resistant aluminum housing which connects to ballast base with an 8 foot cord; 8 foot secondary cord is included. The 100-watt longwave UV bulb is excellent for inspection applications. For increased mobility, select the B-100AR which includes 20 ft (6.1m) primary and secondary cords. Uses for these lamps include non-destructive testing and fluorescence inspection.
B-100Y and B-100YP
These models feature a yellow filter which blocks wavelengths shorter than 500nm and produces three strong mercury lines at 543, 574 and 576nm. The high contrast light is produced for fine surface particle detection. Particles down to 10 microns are routinely visible with this lamp. B-100Y is built with the aluminum housing; B-100YP with a plastic housing. These lamps are excellent for semiconductor wafer inspection as most photoresist absorption occurs below 450nm.
B-100SP
This 140-watt longwave, self-ballasted lamp is a highly portable, high intensity lamp for automotive leak detection applications. The ballast is built directly into the bulb. The B-100SP features the Cool-Touch™ housing and an 8 ft. (2.44m) cord.